• TRC Tentesol T^® is the trademark of the on-line pyrolytic (hard) coated solar control glasses of Trakya Cam.
  
  
• Manufactured by applying a thin, reflective and highly durable coating on body tinted glass during the production of float glass.
  
  
• The pyrolytic coating provides high mechanical and chemical durability.
  
  
• Green and blue colors are available.
  
  
• Provides high light transmittance.
  
  
• The coating can be placed facing outside (surface:1) or inside (surface:2) of the building.
  
  
• If the coating is exposed to the outside, (surface:1) dirt accumulation on the coated surfaces will be more visible, the cleaning of the glass will be required more often regarding the air pollution and amount of dust in the atmosphere. Therefore glazing with the coating on surface 2 is recommended.
  
  
• Can be used as single glazing. Mild detergents and gentle solvents should be used for cleaning. Sharp objects and abrasives should be avoided on the coated surface. Thus assembling into insulating glass units is recommended.
  
  
• Can be incorporated into insulating glass unit with clear float or Heat Control
  (Low-E coated) Glass.
  
  
• Can be toughened, heat strengthened and bent.
  
  
• Lamination is possible. When laminating TRC Tentesol T^®, all panes of the laminated glass should be either toughened or heat strengthened in order to avoid thermal breakage risks.
  
  
• Enamelling is possible. Please refer to the processing guidelines for details.
  
  
• TRC Tentesol T^® solar control glasses are subject to thermal breakage risks. In order to avoid thermal breakage risks, toughening or heat strengthening is recommended.