• Enamelled coatings with wide range of colors can be applied on Emaye Duracam^®.
  
  
• Roller and/or screen print (single or multiple) with background and pattern can be applied to the same surface.
  
  
• Emaye Duracam^® should be drilled or edgeworked prior to enamelling and toughening process. Glass panes can not be cut, drilled or edgeworked after the toughening process.
  
  
• The appearance, light transmittance and solar control performance of  Emaye Duracam^® varies according to the ratio of the enamelled area to the total glass area.
  
  
• Translucent appearance can be provided by applying thinner enamelled coating.
  
  
• Emaye Duracam^® is suitable where an exact match is not required with vision glass or where a contrast is requested.
  
  
• Emaye Duracam^® should be placed facing inside (surface no:2) of the curtain wall applications.
  
  
• Insulating glass units incorporating Emaye Duracam^® on surface 3 or 4 can be used when uniform appearance of curtain wall glazing is required.
  
  
• The manufacturer should be informed regarding the design of the pattern and the position of Emaye Duracam^® in the building. Please refer to the manufacturer for minimum and maximum size.