• Aura Reflekta is the trademark of the on-line coated reflective solar control glass of Trakya Cam.
  
  
• Manufactured by applying a silver reflective coating on one surface of the clear glass through LVC (Laminar vapor coating) process during the production of float glass.
  
  
• Can be used as single glazing, the coated surface should be placed facing inside (surface no:2) of the building. Mild detergents and gentle solvents should be used for cleaning. Sharp objects and abrasives should be avoided on the coated surface. Thus assembling into insulating glass unit is recommended.
  
  
• Can be incorporated into insulating glass unit with clear float or Heat Control
  (Low-E coated) Glass.
  
  
• Can be toughened under certain conditions. Please refer to the processing guidelines for details.
  
  
• Enamelling is possible. Please refer to the processing guidelines for details.
  
  
• Lamination is possible. When laminating Aura Reflekta, all panes of the laminated glass should be either toughened or heat strengthened in order to avoid thermal breakage risks.
  
  
• For spandrel and facade cladding applications, special polyester opacifier film can be bonded to the coated surface. The opacifier film manufacturer should approve conformity of polyester opacifier film and coated surface.
  
  
• Aura Reflekta solar control glass is subject to thermal breakage risks. In order to avoid thermal breakage risks, toughening or heat strengthening is recommended.